Tel: +86-519-85803760
Home > News > Content
Add: Xuejia Town, Xinbei District, Changzhou, Jiangsu
Contact: Andy Shen
Tel: +86-519-85803760
Mob: +8613606119428
Fax: +86-519-88168591

Drainage Pipe Production Line Equipment

PVC pipe production line equipment functions are as follows: raw material mixing: PVC stabilizer, plasticizer, antioxidants and other accessories, according to the proportion of the process has joined the high-speed mixer, the material and mechanical friction from the material to set the temperature Temperature, and then the cooling machine to reduce the material to 40-50 degrees; this can be added to the extruder hopper.Drainage Pipe

Due to the characteristics of the conical screw, the feeding section has a large diameter, the material heat transfer area and shear rate is relatively large, is conducive to the plastic material, measuring the screw diameter is small, reducing the heat transfer area and the melt Of the shear rate, so that the melt can be squeezed at a lower temperature. Screw in the barrel when the rotation, the PVC mixture plasticized to the nose, so as to achieve compaction, melting, mixing homogenization; and to achieve the purpose of exhaust, dehydration.Drainage Pipe

Vacuum Forming Water Tank For the setting, cooling and vacuum setting of the pipe, the vacuum system and the water circulation system for the stereotypes and cooling are installed. Drainage Pipe

The stainless steel box, the circulating water spray cooling, the vacuum setting tank is equipped with the front and rear mobile devices and the left and right, Manual device.Drainage Pipe

Pipe: As PE-Xa pipe with a special plunger extrusion process, the pipe often appear a certain ring corrugated, such as large ripple will affect the pressure resistance of the pipe; while plunger extrusion process extrusion pressure High, resulting in the production of the pipe prone to partial wall, the general production line without wall thickness measurement device to the pipe to the length of the assembly line was found partial wall, small manufacturers to reduce costs, partial wall pipe is still sold in accordance with qualified products. Drainage Pipe

According to the author to understand, there are a lot of cracks in the accident there is a lot of pipe wall caused by wall thickness caused by substandard.Drainage Pipe